The short answer
Digital Label Services delivers label printing into Botany from its Central Coast base at Green Point. The Botany Industrial Park and the container terminals alongside it generate chemical, drum, carton and export labelling, so we supply printed labels, durable label stock, printers, applicators and consumables, with technicians travelling down for service.
Digital Label Services · 7A Melissa St, Green Point NSW 2251 · 0431 942 464 · Monday to Friday, 8:30am–5:00pm
Send an enquiry
Tell us what you need labelled and we will come back with a tailored quote.
Prefer email? info@digitallabelservices.com.au
Botany sits 11 km south of the Sydney CBD in Bayside Council, on the northern shore of Botany Bay. The Botany Industrial Park covers over 60 hectares, bounded by Beauchamp Road to the south, Denison Street to the east, Corish Circle and Anderson Street to the north and the rail freight line to the west. It anchors the southern end of our label printing Sydney coverage.
Operators in the park include Orica Australia, Indorama Ventures Oxides Australia and Ixom, with tenants such as Air Liquide and KBR. Port Botany is a separate locality with its own postcode, 2036. Between the two, the labelling brief is dominated by hazardous chemicals, drums, intermediate bulk containers and export cartons.
What changed when GHS 7 became mandatory?
The classification basis moved. Australia has required GHS Revision 7 for classifying and labelling hazardous chemicals since 1 January 2023, following a changeover from GHS 3 across 2021 and 2022. Product made or brought into the country ahead of that date can stay on its older label without being relabelled, provided its safety data sheet meets Revision 7.
What belongs on the label is set out in Schedule 9 of the Work Health and Safety Regulations: a product identifier, hazard pictograms, a signal word, hazard statements and precautionary statements. Part 7.1 reaches past the original drum as well, covering decanted containers under regulation 342 and pipe work under regulation 343.
What has to survive three months in the sea?
Anything drummed and shipped as dangerous goods. BS 5609 derives from the IMDG Code requirement that a label on a dangerous goods container withstand three months of immersion in the sea, and the current edition of the standard was published on 31 December 2024.
It is tested in two parts. Section 2 puts the base material, face stock and adhesive together, through testing on aluminium and HDPE panels, while Section 3 examines the printed image itself.
How does the port change a carton label?
Volume changes the cost of an error. Port Botany moves 2.8 million TEU a year, handles approximately 99.6 per cent of the state’s containerised cargo, contributes $10.7 billion to Gross State Product and supports around 52,000 jobs, and it is the only Australian port with on-dock freight rail at every container terminal.
At that scale an outer carton that will not scan is a delay with a queue behind it. Non-retail outers are identified with a GTIN-14 rather than the GTIN-13 used at retail, and consistency between the pallet, the carton and the paperwork is what keeps freight moving.
Which products keep a Botany site running?
Both the consumable and the capital side. Label printing in Botany tends to need a mixture of printed labels for known products and on-site printing for batch codes, decanted containers and export documentation that changes per consignment.
Delivered into Botany, Banksmeadow and Pagewood:
- chemical and GHS labels for drums, IBCs, decanted containers and pipe marking
- GS1 barcode labels for cartons, outers and pallet identification
- overprinting systems for coding plain cases and cartons as they are packed
- label applicators where hand application no longer keeps pace with the line
- thermal transfer labels and matched ribbons for durable on-site printing
How far are we from a Botany site?
Around 90 km, roughly an hour and fifteen minutes via the M1, the M2, a harbour crossing and the Eastern Distributor. Our technicians travel that route for installation, operator training, servicing and repairs, and stock, ribbons and spare parts ship from Green Point.
We hold no premises, warehouse or counter in Botany. What we bring instead is a single supplier for printed labels, printing equipment, stock, consumables and support, which for a site running both outsourced drum labels and in-house carton printing is a shorter list of phone numbers.
Which label construction suits which environment?
Durability is a construction decision made before printing, not a finish applied afterwards.
| Where the label lives | What it faces | Construction to discuss |
|---|---|---|
| Drum or IBC for sea export | Salt spray, immersion, weathering | Face stock, adhesive and print assessed under BS 5609 sections 2 and 3 |
| Outdoor tank, yard plant or asset | Sunlight and weather over years | Synthetic face stock with durability assessed by xenon-arc exposure to ISO 4892-2 |
| Chilled or condensing surfaces | Moisture and low application temperature | Adhesive rated for the application temperature, synthetic rather than uncoated paper |
| Carton or pallet leaving the dock | Handling, abrasion, scanning | Paper or synthetic face stock, thermal transfer print where scan grade matters |
| Decanted containers and pipe work | Solvent contact and abrasion | Overlaminate or topcoat, carrying the Schedule 9 label elements |
Label materials, adhesives, inks and finishes should be selected according to the intended application and relevant Australian requirements, and specific technical or regulatory requirements should be discussed with Digital Label Services before production.
“Digital Label Services have delivered quality labels and consumables, cost savings and support for the last 7 months for our colour label printers ensuring that a key component of our business runs efficiently.”
Kim Jardine, General Manager, James Bennett P/L
Frequently asked questions
Do you have a warehouse in Botany?
No. Digital Label Services operates from 7A Melissa St, Green Point on the Central Coast, around 90 km away. Botany is served by delivery and by technician visits, typically an hour and a quarter each way. Label printing in Botany is supplied and serviced from the Coast rather than from a local depot.
Does chemical stock already labelled under GHS 3 have to be relabelled?
Product manufactured or imported ahead of 1 January 2023 can stay on its GHS 3 label without being relabelled, provided the safety data sheet meets Revision 7. Anything classified after that date works to the newer revision. Confirm your own obligations before changing existing artwork, since the answer depends on when the chemical entered the country.
What does BS 5609 actually test?
Two separate things. Section 2 tests the base material, meaning face stock and adhesive, applied to aluminium and HDPE panels, and section 3 tests the printed result for durability. That is why a supplier cannot certify a label by facestock alone: the ink, ribbon and printer used are part of the tested system.
Can GHS labels be printed on site rather than ordered?
Often yes, and much label printing in Botany happens both ways at once. The red hazard diamonds require full colour, and print quality has to hold up on a durable synthetic stock, so the printer and consumables need to be matched deliberately. We can advise on equipment selection, supply the stock and service the machine.
Do you supply applicators as well as labels?
Yes. Label applicators, overprinting systems and packaging equipment sit alongside printers, stock and consumables in what we supply. Where drums or cartons are being labelled by hand in volume, an applicator usually pays for itself in consistency and placement before it does in labour.
Areas we also serve
Speak with our printer specialists about a Botany delivery
Tell us the container, the environment the label has to survive and whether the data changes per batch, and we will recommend a construction, a print method and a supply arrangement.
Get a Personalised QuoteSpeak With Our Printer SpecialistsCall 0431 942 464
References and further reading
- Adoption of GHS 7 — Safe Work Australia. mandatory since 1 January 2023 and treatment of older stock
- Marine Use Label Testing (BS 5609) — UL Solutions. section 2 and section 3 testing and the IMDG basis
- BS 5609:2024 — BSI. current edition published 31 December 2024
- Port Botany — NSW Ports. container volumes, economic contribution and on-dock rail